www.rockymountainatv.com Piston and Ring Replacement on the KTM RFS motor. Rebuild the top end on your 4 stroke atv or motorcycle. Piston change.
Posts Tagged ‘Rebuild’
Motorcycle Top End Rebuild for Four-Stroke (Part 2 of 2)
Written by Tools on Monday, October 17th, 2011 in Motorcycle.
Tags: FourStroke, Motorcycle, part, Rebuild
HOW TO – Two Cycle Carburetor Cleaning / Rebuild (Part 2 of 2)
Written by Tools on Saturday, July 9th, 2011 in Power Equipment.
Tags: carburetor, Cleaning, cycle, part, Rebuild
Since this is only an instructional video series I was not going to use any carburetor cleaner. Basically i’m explaining how to check the pump diaphragm, & metering diaphragm as well as how to clean a two cycle carburetor. K10-WAT & K20-WAT rebuild kits are for all WA & WT series Walbro carburetors. Most of the time you can get away with ordering a K10-WAT if you only need to replace the diaphragms. If you need to do a complete rebuild order K20-WAT. There are special tools for checking both Zama, and Walbro carburetor metering levers but I have found that a metal straight edge ruler is just as accurate. WALBRO METERING LEVER TOOL : compare.ebay.com ZAMA METERING LEVER TOOL : cgi.ebay.com This rebuild / cleaning procedure will also apply to carburetors without a purge bulb. I will do a proper video when I have an actual rebuild or cleaning.
HOW TO – Two Cycle Carburetor Cleaning / Rebuild (Part 1 of 2)
Written by Tools on Tuesday, July 5th, 2011 in Power Equipment.
Tags: carburetor, Cleaning, cycle, part, Rebuild
Since this is only an instructional video series I was not going to use any carburetor cleaner. Basically i’m explaining how to check the pump diaphragm, & metering diaphragm as well as how to clean a two cycle carburetor. K10-WAT & K20-WAT rebuild kits are for all WA & WT series Walbro carburetors. Most of the time you can get away with ordering a K10-WAT if you only need to replace the diaphragms. If you need to do a complete rebuild order K20-WAT. There are special tools for checking both Zama, and Walbro carburetor metering levers but I have found that a metal straight edge ruler is just as accurate. WALBRO METERING LEVER TOOL : compare.ebay.com ZAMA METERING LEVER TOOL : cgi.ebay.com This rebuild / cleaning procedure will also apply to carburetors without a purge bulb. I will do a proper video when I have an actual rebuild or cleaning.
how to rebuild a fuel injector by watkinsmotorsports.com
Written by Tools on Monday, June 13th, 2011 in Hand Tools.
Tags: Fuel, injector, Rebuild, watkinsmotorsports.com
Ever wonder if your injectors are working properly. Watkinsmotorsports.com shows you how to clean, test and replace soft parts on your fuel injectors. It’s not as hard as it seems. Using an ultra-sonic jewelry cleaner and a few simple hand tools you can rebuild your fuel injectors yourself. Learn how to test injector coils (Ohm readings) and how to replace fuel injector basket filters.
5 Speed Transmission teardown, inspect/repair, rebuild
Written by Tools on Monday, January 10th, 2011 in Hand Tools.
Tags: inspect/repair, Rebuild, Speed, teardown, Transmission
Our newest release…….. Michael takes you step by step in tearing down and rebuilding a stock 5 speed transmission. PLEASE NOTE! SPECIAL TOOLS ARE REQUIRED! Please check the website write-up for a list of tools other than stock hand tools.
Ni-CD battery rebuild and upgrade Part1.wmv
Written by Tools on Saturday, September 4th, 2010 in Power Tools.
Tags: Battery, Nicd, Part1.wmv, Rebuild, upgrade
Rebuild, Refurbish and Upgrade the Ni-Cd battery packs in your power tools , cordless phones, remote control toys … any power pack with two or more cells. Upgrade the mA (mA = milliamp) of your original by as much as 40%. What does that mean? Or, what does that do for me? mA is the ‘quantity’ of power available (amperage) to do work. mA translates to hours of use (mAh or Milliamp hours) by dividing the mA by 1000. Therefore; 1500 mA is equal to 1.5 hours of use. 1500 mA is typical for most older Ni-Cd power packs. The charger should accept and charge up to 2100 mA (that equals 2.1 mAh or 2.1 hours). But that . Trying to force it to charge cells higher than 40% of the original mA would exceed the limit of its perimeters and will result in you spending more for cells that will never fully charge. Here’s the math: 1500mA x 40% = 600mA 1500mA + 600 = 2100mA Most new / replacement cells will recharge 300 to 500 times if properly charged, discharged and stored when not in use.
Rethink Rebuild
Written by Tools on Tuesday, August 24th, 2010 in Automotive Parts.
Tags: Rebuild, Rethink
This is an introduction into the automotive parts rebuilding/remanufacturing industry. The benefits to the environment and economy by rebuilding are highlighted in this film. Contact the Automotive Parts Remanufacturers Association at 703-968-2772 or on the web at www.apra.org for more information